This robust Aluminum 6061 stock sheet offers superior strength and corrosion resistance. Precisely sized at 0.667" x 16" x 37", it's engineered for demanding heating, cooling, and industrial applications requiring reliability.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.667" |
| Length | 16" |
| Width | 37" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet exhibits excellent mechanical properties characteristic of the 6xxx series alloys. With a thickness of 0.667 inches, a length of 16 inches, and a width of 37 inches, it provides a substantial surface area for fabrication. The alloy's balanced composition (typically 0.8-1.2% Mg, 0.4-0.8% Si, 0.15-0.4% Cu, 0.04% Cr) ensures good formability, weldability, and moderate strength, making it suitable for heat exchangers, structural components in HVAC systems, and custom industrial fabrications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before cutting. 2. Utilize appropriate cutting tools (e.g., band saw, abrasive cut-off saw) for precise sizing. 3. Ensure all fabricated components are deburred and cleaned prior to assembly or installation in its intended environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper tool selection for cutting, leading to material deformation or uneven edges. | Employ carbide-tipped blades or specialized aluminum cutting saws for clean, precise cuts. |
| Ignoring potential galvanic corrosion when dissimilar metals are in contact in moist environments. | Use insulating washers or coatings when joining Aluminum 6061 with less noble metals, especially in corrosive settings. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, HVAC Ductwork Components, Industrial Structural Framing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||