This premium Aluminum 6061 stock sheet offers exceptional durability and thermal conductivity, making it ideal for demanding pressure and temperature control systems requiring reliable performance and corrosion resistance.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.621" |
| Length | 19" |
| Width | 27" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts a precise thickness of 0.621 inches, a length of 19 inches, and a width of 27 inches. Aluminum 6061 is a precipitation-hardened aluminum alloy, renowned for its excellent corrosion resistance, good strength, weldability, and machinability. Its mechanical properties make it a superior choice for components subjected to moderate stress and varying thermal loads within pressure and temperature regulation systems, including heat exchangers, manifold blocks, and thermal barrier components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully align the Aluminum 6061 sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and torque settings, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incompatible fasteners. | Always select fasteners that are rated for the intended load and are compatible with aluminum to prevent galvanic corrosion. |
| Applying excessive torque during fastening. | Utilize a calibrated torque wrench to achieve the specified tightness, preventing deformation or stress concentration in the sheet. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Components, Manifold Blocks for Fluid Control, Thermal Barrier Plates, Pressure Vessel Linings, Temperature Regulation Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||