This premium Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it the ideal choice for robust hydraulic system components and fabrication.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.601" |
| Length | 19" |
| Width | 37" |
Manufactured under strict quality controls, this 0.601" thick Aluminum 6061 sheet provides a yield strength of 35,000 psi and a tensile strength of 38,000 psi. Its T6 temper ensures excellent formability and weldability, crucial for intricate hydraulic manifold design and construction. The material's inherent resistance to corrosion makes it suitable for demanding environments where fluid integrity is paramount. Dimensions are precisely held at 19" width and 37" length for optimal material utilization in hydraulic component manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate machining techniques. 3. Deburr all edges thoroughly to prevent stress risers and material fatigue.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs and uneven edges. | Employ high-quality carbide-tipped blades or waterjet cutting for clean, precise cuts and minimal edge deformation. |
| Neglecting surface preparation before assembly or fabrication. | Thoroughly degrease and clean the aluminum surface to ensure optimal adhesion for coatings, sealants, or welding. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifolds, Pump Housings, Cylinder End Caps, Hydraulic Fluid Reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||