This premium Aluminum 6061 stock sheet, precisely cut to 0.590" x 37" x 29", offers exceptional strength and corrosion resistance, making it the preferred material for robust hydraulic applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.590" |
| Length | 37" |
| Width | 29" |
A proven choice for industrial professionals, this Aluminum 6061 stock sheet, measuring 0.590 inches thick by 37 inches long and 29 inches wide, is engineered for demanding hydraulic environments. The 6061 alloy provides an optimal balance of strength, weldability, and corrosion resistance, critical for maintaining system integrity under pressure. Its superior machinability ensures precise component fabrication, while its inherent toughness resists deformation and fatigue. This specific sheet size is ideal for fabricating custom hydraulic manifolds, structural components, and protective housings where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the material is clean and free from contaminants before fabrication. 2. Utilize appropriate cutting and machining tools designed for aluminum alloys. 3. Follow standard welding procedures for Aluminum 6061 if applicable, ensuring proper joint preparation and filler material selection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to poor edge quality and tool wear. | Employ specialized carbide or high-speed steel tooling designed for aluminum to achieve clean cuts and extend tool life. |
| Inadequate pre-treatment before welding, resulting in porosity or weak welds. | Thoroughly degrease and remove any oxide layer from the weld joint area prior to welding. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom Hydraulic Manifold Fabrication, Hydraulic System Structural Components, Protective Housings for Hydraulic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||