This robust Aluminum 6061 stock sheet is engineered for critical hydraulic systems. Its precise dimensions and superior material properties ensure reliability and longevity in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.535" |
| Length | 20" |
| Width | 47" |
A high-performance industrial component, this Aluminum 6061 stock sheet, with its specified dimensions of 0.535 inches (13.59 mm) in thickness, 20 inches (508 mm) in length, and 47 inches (1194 mm) in width, offers exceptional strength-to-weight ratio. Aluminum 6061 is a precipitation-hardening alloy known for its moderate to high strength, excellent corrosion resistance, good weldability, and formability. This makes it an ideal choice for components within hydraulic systems where pressure containment, thermal conductivity, and resistance to fluid degradation are paramount. Its precise tolerances facilitate seamless integration into complex assemblies, ensuring optimal fluid dynamics and system integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Accurately cut the Aluminum 6061 sheet to the required component geometry using appropriate machining techniques. 3. Ensure all mating surfaces are clean and free of contaminants prior to assembly within the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to burrs or uneven edges. | Utilize sharp tooling and appropriate feed rates during machining to achieve clean, precise cuts. |
| Contamination of the material surface before or during installation. | Handle the sheet with clean gloves and store in a protected environment to prevent ingress of debris or corrosive substances. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Cylinder Components, Fluid Connectors, Hydraulic Reservoir Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||