This robust Aluminum 6061 stock sheet is engineered for superior performance in demanding heating and cooling systems. Its optimized dimensions and material properties ensure efficient heat transfer and structural integrity.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.519" |
| Length | 42" |
| Width | 28" |
A high-performance industrial component, this Aluminum 6061 stock sheet offers a thickness of 0.519 inches, a length of 42 inches, and a width of 28 inches. Aluminum 6061, a precipitation-hardened alloy, is renowned for its excellent strength-to-weight ratio, good corrosion resistance, and outstanding thermal conductivity, making it an ideal choice for heat exchangers, HVAC components, and thermal management solutions. Its machinability and weldability further enhance its versatility in custom fabrication for critical heating and cooling applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean and free of debris. 2. Accurately position the Aluminum 6061 sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor thermal contact. | Thoroughly clean and degrease the mating surfaces before installation to maximize heat transfer efficiency. |
| Over-tightening fasteners, causing deformation or stress concentrations. | Use torque wrenches to apply fasteners to the recommended specifications, preventing material damage. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, HVAC Ductwork and Components, Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||