This robust Aluminum 6061 stock sheet is engineered for demanding pulling and lifting applications. Its precise dimensions and superior material properties ensure reliability and longevity in critical industrial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.513" |
| Length | 38" |
| Width | 43" |
A proven choice for industrial professionals, this Aluminum 6061 stock sheet offers a compelling blend of strength, corrosion resistance, and formability. With a precise thickness of 0.513 inches, a substantial length of 38 inches, and a width of 43 inches, it is ideally suited for fabricating robust components within pulling and lifting systems. 6061 aluminum's excellent weldability and machinability, coupled with its relatively low density, make it a preferred material for applications where weight reduction is a factor without compromising structural integrity. This alloy's inherent resistance to environmental degradation ensures extended service life in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and condition against project specifications. 2. Clean surfaces thoroughly to remove any contaminants. 3. Fabricate or integrate into the pulling/lifting system using appropriate welding or fastening techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade aluminum for structural components. | Always specify Aluminum 6061 or equivalent for critical load-bearing elements in pulling and lifting equipment. |
| Inadequate surface preparation before welding or joining. | Ensure surfaces are free from oxides, grease, and other contaminants to achieve strong, reliable welds and connections. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting frames and fixtures, Structural components for hoists and winches, Reinforcement plates in rigging assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||