This high-grade Aluminum 6061 stock sheet is engineered for superior performance in hydraulic applications. Its exceptional strength-to-weight ratio and excellent corrosion resistance ensure reliability and longevity in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.506" |
| Length | 12" |
| Width | 28" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet features a nominal thickness of 0.506 inches, a width of 28 inches, and a length of 12 inches. Aluminum 6061 is a precipitation-hardened alloy known for its excellent strength, corrosion resistance, weldability, and machinability, making it a preferred material for critical hydraulic components such as manifolds, valve bodies, and pressure vessels. The material's inherent properties provide robust performance under high-pressure conditions and resistance to environmental degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate thread sealant or gasket material as per hydraulic system design. 3. Securely fasten components using specified torque values and hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect thread sealant for the specific hydraulic fluid. | Consult the hydraulic system's fluid compatibility chart and select a sealant rated for the intended fluid type. |
| Over-tightening fasteners, leading to stress on the aluminum sheet or component. | Adhere to the manufacturer's recommended torque specifications for all fasteners to prevent damage and ensure proper sealing. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Valve Bodies and Housings, Pressure Vessels and Reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||