This Aluminum 6061 stock sheet offers superior strength-to-weight ratio and excellent corrosion resistance, making it a prime selection for critical hydraulic system components requiring durability and reliability.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.502" |
| Length | 35" |
| Width | 47" |
A proven choice for industrial professionals, this Aluminum 6061 stock sheet, precisely fabricated to 0.502 inches thickness, 35 inches width, and 47 inches length, exemplifies the material's exceptional performance characteristics. Aluminum 6061 is a precipitation-hardened alloy known for its medium to high strength, excellent toughness, and good weldability. Its inherent corrosion resistance makes it ideal for hydraulic manifold blocks, valve bodies, and structural components exposed to fluids and varying environmental conditions. This specific dimensioning ensures efficient material utilization for precise machining of complex hydraulic parts, minimizing waste and maximizing operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material meets design specifications for intended hydraulic application. 2. Machine to precise dimensions according to engineering drawings, ensuring tight tolerances for fluid containment and flow. 3. Perform necessary post-machining treatments, such as deburring and cleaning, before assembly into the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade aluminum alloy not suited for hydraulic pressures. | Always specify and procure Aluminum 6061 or equivalent for hydraulic components to ensure adequate strength and resistance to fluid pressure. |
| Insufficient post-machining cleaning leading to contamination. | Thoroughly clean all machined surfaces to remove chips, debris, and any residual cutting fluids before assembly to prevent system blockage or damage. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Hydraulic Valve Bodies, Hydraulic System Structural Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||