This robust Aluminum 6061 stock sheet is engineered for critical pressure and temperature control systems. Its precise dimensions and superior material properties ensure reliable performance in challenging industrial settings.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.498" |
| Length | 31" |
| Width | 14" |
Designed for demanding industrial environments, this Aluminum 6061 stock sheet boasts a thickness of 0.498 inches, a length of 31 inches, and a width of 14 inches. Aluminum 6061 is a precipitation-hardened alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and ease of fabrication. This makes it an ideal material for components within pressure vessels, heat exchangers, and thermal management systems where both structural integrity and thermal conductivity are paramount. Its uniform composition ensures predictable performance under varying thermal loads and moderate pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully position the Aluminum 6061 sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and sealing methods as dictated by the application's pressure and temperature requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for the intended pressure or temperature. | Always select fasteners made from materials compatible with Aluminum 6061 and rated for the operating conditions to prevent premature failure or leaks. |
| Improper surface preparation leading to poor sealing. | Thoroughly clean and degrease mating surfaces before installation to ensure a reliable seal, especially in high-pressure or high-temperature applications. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Components, Pressure Vessel Liners, Thermal Management Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||