This premium Aluminum 6061 stock sheet, precisely dimensioned at 0.492" thick, 37" wide, and 39" long, is engineered for superior performance in hydraulic systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.492" |
| Length | 37" |
| Width | 39" |
Built to exacting engineering tolerances, this Aluminum 6061 sheet offers a robust combination of strength, weldability, and corrosion resistance, crucial for hydraulic component fabrication. Its 0.492" thickness ensures structural integrity under pressure, while the 37" x 39" dimensions provide ample material for complex manifold blocks, reservoir housings, and custom hydraulic system components. Alloy 6061 is precipitation-hardened and exhibits excellent formability and machinability, making it the material of choice for demanding fluid power applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare precise cutting lines based on design specifications. 2. Utilize appropriate machining tools for accurate shaping and drilling. 3. Ensure all surfaces are clean and deburred before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard aluminum alloys not rated for hydraulic pressures. | Always specify Aluminum 6061 or higher-grade alloys for hydraulic applications where pressure and fatigue resistance are critical. |
| Inadequate deburring of cut edges. | Thoroughly deburr all cut edges and drilled holes to prevent fluid cavitation and material fatigue initiation. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Hydraulic Cylinder Components, Hydraulic Reservoir Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||