This high-quality Aluminum 6061 stock sheet, precisely manufactured to 0.465" thickness, 45" length, and 32" width, is engineered for superior performance in hydraulic systems, offering excellent strength-to-weight ratio and corrosion resistance.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.465" |
| Length | 45" |
| Width | 32" |
Trusted by engineers across multiple sectors, this Aluminum 6061 stock sheet offers exceptional mechanical properties essential for demanding hydraulic applications. Measuring 0.465 inches in thickness, 45 inches in length, and 32 inches in width, it is fabricated from the widely utilized 6061 aluminum alloy. This alloy is renowned for its excellent corrosion resistance, good weldability, and high strength-to-weight ratio, making it a preferred choice for components subjected to fluid pressure and environmental exposure. Its machinability further facilitates the precise fabrication of complex hydraulic manifolds, housings, and structural elements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and free of debris. 2. Accurately position the Aluminum 6061 sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, ensuring uniform load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners leading to uneven stress distribution. | Utilize fasteners rated for the required load capacity and ensure proper spacing as per engineering drawings. |
| Improper surface preparation leading to poor adhesion or gasket failure. | Thoroughly clean and degrease the mating surfaces before installation to ensure a reliable seal. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Cylinder Components, Fluid Reservoirs, Structural Supports in Mobile Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||