This Aluminum 6061 stock sheet provides a robust and lightweight solution for hydraulic system components. Its superior strength-to-weight ratio ensures operational efficiency and longevity in demanding environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.460" |
| Length | 28" |
| Width | 47" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet features a nominal thickness of 0.460 inches, a length of 28 inches, and a width of 47 inches. Aluminum 6061 is a precipitation-hardened alloy, offering excellent corrosion resistance, good machinability, and high strength, making it ideal for hydraulic manifolds, enclosures, and structural components where weight reduction and material integrity are critical. Its balanced mechanical properties ensure it can withstand the pressures and operational stresses inherent in hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Machine to precise dimensions according to hydraulic system design specifications. 3. Integrate into the hydraulic system, ensuring proper sealing and structural support.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard aluminum alloys that lack the required strength for hydraulic pressure. | Always specify and utilize Aluminum 6061 or higher-grade alloys for hydraulic components to guarantee system integrity and safety. |
| Improper edge preparation leading to stress concentrations. | Carefully deburr and radius all cut edges to prevent premature fatigue failure in high-pressure hydraulic applications. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifolds, Hydraulic System Housings, Structural Components for Hydraulic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||