This Aluminum 6061 stock sheet offers superior strength and corrosion resistance. Precisely manufactured to 0.459" thickness, it's ideal for demanding pressure and temperature control applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.459" |
| Length | 24" |
| Width | 14" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet boasts exceptional mechanical properties. Its composition of approximately 97.9% aluminum, 1.0% magnesium, 0.6% silicon, 0.28% copper, and 0.2% chromium ensures excellent strength-to-weight ratio, good weldability, and superior corrosion resistance, particularly in marine environments. With dimensions of 0.459" (nominal, often corresponding to 15/32" or slightly less than 1/2") thickness, 24" length, and 14" width, it is well-suited for fabricated components in moderate to high-stress pressure vessels, heat exchangers, and control system housings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Utilize appropriate cutting and machining techniques for aluminum alloys. 3. Follow established welding or joining procedures for 6061-T6 if required, ensuring proper filler material selection. 4. Integrate into the pressure or temperature control system according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for 6061-T6. | Consult welding standards and use appropriate filler materials (e.g., 4043 or 5356) and pre/post-weld heat treatments as necessary for optimal joint strength and corrosion resistance. |
| Improper material handling leading to surface damage. | Store and handle the sheet with care, using protective coverings and avoiding abrasive contact to maintain surface integrity, especially if aesthetic finish is critical. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Control panel enclosures, Structural elements in extreme environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||