Premium Aluminum 6061 stock sheet, precisely cut to 0.451" thickness, 29" length, and 32" width. Ideal for demanding pressure and temperature control systems requiring superior strength and thermal conductivity.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.451" |
| Length | 29" |
| Width | 32" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a nominal thickness of 0.451 inches, a length of 29 inches, and a width of 32 inches. Aluminum 6061 is a precipitation-hardened alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and good weldability, making it a preferred material for critical components in pressure and temperature regulation systems, heat exchangers, and structural elements within these environments. Its inherent thermal conductivity facilitates efficient heat transfer.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from debris. 2. Accurately mark and cut the sheet to the required dimensions using appropriate tooling. 3. Smooth all cut edges to remove any burrs before assembly or further processing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to uneven edges and material deformation. | Employ sharp, high-quality cutting tools specifically designed for aluminum to achieve clean and precise cuts. |
| Improper handling causing scratches or dents on the sheet surface. | Handle the sheet with care, utilizing gloves and avoiding abrasive contact with other surfaces. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Components, Pressure Vessel Fabrication, Control Valve Bodies, Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||