This Aluminum 6061 stock sheet offers superior strength-to-weight ratio, excellent corrosion resistance, and machinability, making it a prime choice for critical hydraulic system components.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.443" |
| Length | 37" |
| Width | 19" |
Manufactured under strict quality controls, this Aluminum 6061 sheet boasts a nominal thickness of 0.443 inches, a length of 37 inches, and a width of 19 inches. 6061 aluminum alloy is a precipitation-hardened aluminum-magnesium-silicon alloy, known for its medium to high strength, excellent corrosion resistance, weldability, and formability. This specific sheet is engineered for applications demanding high structural integrity and resistance to hydraulic fluids and environmental factors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, free of debris, and properly prepared for assembly. 2. Carefully align the Aluminum 6061 sheet with the designated hydraulic component. 3. Securely fasten using appropriate fasteners and torque specifications, ensuring a leak-proof seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for hydraulic pressure applications. | Employ high-strength, corrosion-resistant fasteners specifically designed for hydraulic systems to prevent catastrophic failure. |
| Over-torquing or under-torquing fasteners, leading to seal compromise or structural stress. | Adhere strictly to the specified torque values for all fasteners to ensure proper sealing and prevent material fatigue. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic manifold blocks, Reservoir end caps, Pump housings, Cylinder components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||