This 0.442" thick Aluminum 6061 stock sheet, measuring 30" x 15", is engineered for demanding pressure and temperature control systems, offering a reliable and versatile material solution.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.442" |
| Length | 30" |
| Width | 15" |
A proven choice for industrial professionals, this Aluminum 6061 stock sheet boasts exceptional strength-to-weight ratio and excellent corrosion resistance, making it ideal for environments subject to pressure fluctuations and thermal cycling. With a thickness of 0.442 inches, a length of 30 inches, and a width of 15 inches, it provides ample material for fabrication in critical pressure vessel components, heat exchangers, and temperature regulation housings. Its superior machinability allows for precise component manufacturing, ensuring tight tolerances and reliable performance in high-stakes applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate sealant or gasket material as per system design specifications. 3. Secure sheet using designated fasteners, ensuring uniform clamping pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to seal failure. | Thoroughly clean all mating surfaces with an approved solvent before installation. |
| Over-tightening fasteners causing material deformation. | Follow specified torque values for all fasteners to avoid over-stressing the aluminum. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel fabrication, Heat exchanger components, Temperature control housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||