This premium Aluminum 6061 stock sheet, precisely cut to 0.419" x 18" x 39", is engineered for demanding heating and cooling applications, offering superior thermal conductivity and corrosion resistance.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.419" |
| Length | 18" |
| Width | 39" |
Manufactured under strict quality controls, this Aluminum 6061 stock sheet features a nominal thickness of 0.419 inches, an 18-inch width, and a 39-inch length. As a T6 temper alloy, 6061 exhibits excellent strength-to-weight ratio, good formability, and superior corrosion resistance, making it an ideal material for heat dissipation and structural components within HVAC systems, heat exchangers, and thermal management solutions. Its inherent thermal conductivity ensures efficient heat transfer.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly to remove any contaminants. 2. Fabricate to required dimensions using appropriate cutting and forming tools. 3. Ensure proper joint preparation for welding or bonding as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burring or uneven edges. | Utilize high-speed steel or carbide-tipped cutting tools designed for aluminum, with adequate coolant. |
| Neglecting surface preparation before joining, resulting in poor weld quality or adhesion. | Always degrease and mechanically clean the surfaces to be joined immediately prior to welding or bonding. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fins, HVAC Ductwork Components, Thermal Plates and Heat Sinks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||