This Aluminum 6061 stock sheet is engineered for demanding pulling and lifting applications. Its superior strength-to-weight ratio and corrosion resistance make it a reliable choice for robust structural components and custom fabrication.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.406" |
| Length | 45" |
| Width | 13" |
Built to exacting engineering tolerances, this 0.406-inch thick Aluminum 6061 stock sheet offers a nominal length of 45 inches and a width of 13 inches. Aluminum 6061 is a precipitation-hardened alloy known for its moderate to high strength, excellent corrosion resistance, and good weldability, making it suitable for a wide range of structural uses. Its light weight compared to steel is a significant advantage in applications where weight reduction is critical for efficiency and ease of handling in pulling and lifting scenarios. This product is ideal for fabricating custom rigging hardware, custom lifting frames, and structural supports in marine and aerospace environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Precisely measure and mark cutting lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., abrasive saw, waterjet) and safety precautions for aluminum fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge deformation. | Employ specialized aluminum cutting blades or waterjet systems for clean, precise cuts without compromising material integrity. |
| Inadequate surface preparation before welding or assembly. | Thoroughly clean the aluminum surface with a degreaser and wire brush to remove oxidation and contaminants for optimal joint strength. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom rigging components, Lightweight lifting frames, Structural supports in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||