This 0.402-inch thick Aluminum 6061 stock sheet offers superior strength-to-weight ratio. Its robust construction makes it ideal for demanding pulling and lifting applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.402" |
| Length | 19" |
| Width | 23" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet boasts a precise thickness of 0.402 inches, a length of 19 inches, and a width of 23 inches. Fabricated from 6061-T6 aluminum alloy, it exhibits excellent corrosion resistance, weldability, and a yield strength of approximately 35,000 psi. This composition ensures superior performance in structural components subjected to moderate tensile and shear stresses, commonly found in custom rigging hardware, fabrication of lifting frames, and support structures for dynamic loads. Its dimensional stability and resistance to fatigue are critical for ensuring the longevity and safety of lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mounting surfaces thoroughly. 2. Secure sheet using appropriate fasteners for the load-bearing application, ensuring even torque distribution. 3. Conduct load testing to verify structural integrity prior to operational use.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for the intended load. | Always select fasteners with a shear and tensile strength exceeding the calculated maximum load for the application. |
| Inadequate surface preparation leading to compromised joint strength. | Ensure all surfaces are free from grease, oil, and debris before assembly to achieve optimal adhesion or fastener engagement. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom Rigging Components, Fabricated Lifting Frames, Support Structures for Material Handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||