A robust Aluminum 6061 stock sheet engineered for demanding pulling and lifting applications. Its superior corrosion resistance and high strength-to-weight ratio make it ideal for critical structural components.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.372" |
| Length | 47" |
| Width | 13" |
A high-performance industrial component, this Aluminum 6061 stock sheet is precisely manufactured to dimensions of 0.372 inches (9.45 mm) in thickness, 47 inches (1194 mm) in length, and 13 inches (330 mm) in width. Aluminum 6061 is a precipitation-hardened alloy known for its excellent corrosion resistance, good weldability, and high strength-to-weight ratio, making it exceptionally well-suited for applications where structural integrity under load and environmental exposure are paramount. Its machinability also allows for custom fitting and integration into complex lifting and pulling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before integration. 2. Securely fasten the sheet using appropriate structural fasteners or welding techniques as per design specifications. 3. Conduct thorough load testing to verify structural integrity and compliance with safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for shear loads in lifting applications. | Always utilize high-strength, load-rated fasteners (e.g., Grade 8 bolts or specialized lifting hardware) appropriate for the anticipated stresses. |
| Improper edge preparation leading to stress concentrations. | Deburr and radius all edges, especially at cutouts or attachment points, to prevent premature fatigue failure. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Structural components for hoists and cranes, Custom rigging hardware and attachments, Reinforcement plates for winches and pulling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||