This high-strength Aluminum 6061 stock sheet is engineered for critical hydraulic system components. Its superior corrosion resistance and excellent machinability ensure reliable performance in harsh industrial settings.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.324" |
| Length | 36" |
| Width | 21" |
Designed for demanding industrial environments, this 0.324-inch thick Aluminum 6061 stock sheet offers a robust solution for hydraulic manifold blocks, structural supports, and custom fluid power components. Aluminum 6061, a precipitation-hardening alloy, provides an optimal balance of strength, corrosion resistance, and weldability, crucial for maintaining system integrity under pressure. The 36-inch length and 21-inch width facilitate efficient layout and fabrication of complex hydraulic assemblies, minimizing material waste and machining time. Its mechanical properties make it ideal for applications requiring lightweight yet durable construction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut to required dimensions using appropriate machining techniques. 3. Perform necessary fabrication steps, such as drilling, tapping, and milling, adhering to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to material stress or deformation. | Utilize sharp, high-quality cutting tools and appropriate feed rates to avoid excessive heat and stress concentration. |
| Inadequate surface preparation before welding or bonding. | Thoroughly clean and degrease the mating surfaces to ensure optimal adhesion and structural integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Custom Hydraulic Component Fabrication, Structural Supports for Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||