High-strength Aluminum 6061 stock sheet, precisely manufactured for demanding pressure and temperature control applications. Its robust composition ensures reliable performance and longevity in critical environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.287" |
| Length | 46" |
| Width | 13" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet measures 0.287 inches in thickness, 46 inches in length, and 13 inches in width. Alloy 6061 is a precipitation-hardened aluminum-magnesium-silicon alloy, renowned for its excellent strength-to-weight ratio, good corrosion resistance, and moderate toughness. This makes it exceptionally well-suited for applications requiring structural integrity under varying pressure and temperature conditions, such as heat exchangers, pressure vessels, and critical component housings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully position the Aluminum 6061 sheet to align with system requirements. 3. Secure the sheet using appropriate fasteners or welding techniques as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong fastener material which can lead to galvanic corrosion. | Utilize stainless steel or compatible aluminum fasteners to prevent galvanic corrosion with Aluminum 6061. |
| Applying excessive heat during welding, causing loss of strength in the heat-affected zone. | Employ appropriate welding procedures for 6061-T6, such as TIG welding with ER5356 filler, and pre/post-weld heat treatment if necessary. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, Pressure Vessel Components, Control System Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||