This 0.238" thick Aluminum 6061 stock sheet, measuring 23" x 44", is a robust solution for demanding hydraulic systems. It offers excellent machinability and a superior strength-to-weight ratio.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.238" |
| Length | 23" |
| Width | 44" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet boasts a thickness of 0.238 inches, a length of 23 inches, and a width of 44 inches. The 6061 alloy is renowned for its excellent corrosion resistance, good weldability, and high mechanical strength after heat treatment. This makes it an ideal material for components within hydraulic systems requiring durability and light weight, such as custom manifold blocks, structural supports, and housing components where resistance to fluid and environmental degradation is critical. Its balanced properties ensure consistent performance under operational pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fasteners and sealing compounds as per hydraulic system requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to seal failure. | Thoroughly clean and deburr all cut edges and mating surfaces before assembly. |
| Over-tightening fasteners, causing material deformation. | Follow specified torque values for all fasteners to prevent stress concentrations. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom Hydraulic Manifold Blocks, Hydraulic System Housings, Structural Supports for Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||