This Aluminum 6061 stock sheet, precisely manufactured to 0.211" x 42" x 34", is a staple in hydraulic systems for its superior strength-to-weight ratio and excellent corrosion resistance.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.211" |
| Length | 42" |
| Width | 34" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a nominal thickness of 0.211 inches, a length of 42 inches, and a width of 34 inches. It is a precipitation-hardened alloy known for its good machinability, weldability, and high resistance to corrosion, making it exceptionally suited for components within demanding hydraulic fluid power systems where integrity and longevity are paramount. The material's balanced mechanical properties ensure reliable performance under pressure and stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Precisely cut to required dimensions using appropriate tooling. 3. Deburr all edges to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for aluminum alloys. | Employ carbide-tipped or HSS tooling with appropriate rake angles and speeds for clean cuts. |
| Improper storage leading to surface damage or oxidation. | Store in a dry, protected environment, ideally on non-abrasive supports, and consider protective film. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic manifold blocks, Pressure vessel components, Custom hydraulic fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||