This 0.202" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio, making it a superior choice for custom pulling and lifting assemblies where performance and longevity are critical.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.202" |
| Length | 13" |
| Width | 43" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet measures 0.202 inches in thickness, 13 inches in width, and 43 inches in length. Composed of a precipitation-hardened aluminum alloy, 6061 exhibits excellent corrosion resistance, good weldability, and high mechanical strength, particularly after heat treatment. Its machinability allows for precise custom fabrication of components used in various pulling and lifting mechanisms, such as custom brackets, reinforcement plates, and structural elements within hoists and cranes. The material's inherent lightness minimizes dead weight, enhancing operational efficiency and reducing energy consumption in dynamic load applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly to remove any grease, oil, or debris. 2. Position the sheet accurately according to design specifications for the pulling or lifting assembly. 3. Securely fasten the sheet using appropriate fasteners and welding techniques as dictated by the application's load requirements and material compatibility.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not rated for aluminum alloy strength. | Always employ fasteners specifically designed for or compatible with Aluminum 6061, considering shear strength and corrosion resistance. |
| Improper welding technique leading to reduced material integrity. | Utilize TIG or MIG welding with appropriate filler materials (e.g., 4043 or 5356) and controlled heat input to maintain the alloy's optimal properties. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting bracket fabrication, Reinforcement plates for winch systems, Structural components for specialized lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||