This Aluminum 6061 stock sheet is engineered for robust hydraulic system components. Its precise dimensions and superior material properties ensure reliability and performance in challenging industrial settings.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.191" |
| Length | 20" |
| Width | 19" |
Designed for demanding industrial environments, this Aluminum 6061 stock sheet (0.191" thickness, 20" length, 19" width) offers exceptional strength-to-weight ratio and excellent corrosion resistance, crucial for hydraulic applications. The 6061 alloy, characterized by its magnesium and silicon content, provides good formability, weldability, and machinability, allowing for complex component fabrication. Its inherent durability makes it ideal for manifold blocks, pump housings, cylinder components, and structural supports within hydraulic systems where consistent performance under pressure is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project requirements. 2. Prepare mating surfaces for welding or fastening, ensuring cleanliness and proper alignment. 3. Fabricate and install components according to engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect sheet thickness for pressure-bearing hydraulic components. | Always consult hydraulic system pressure ratings and design specifications to select the appropriate sheet thickness to prevent structural failure. |
| Neglecting proper surface preparation before welding or bonding. | Thoroughly clean all surfaces with an appropriate degreaser and wire brush to remove oxides and contaminants, ensuring strong and reliable joints. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Pump and Valve Housings, Cylinder Components, Structural Supports in Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||