This Aluminum 6061 stock sheet is engineered for robust hydraulic systems. Its superior strength-to-weight ratio and corrosion resistance make it ideal for critical fluid power components.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.190" |
| Length | 23" |
| Width | 22" |
Precision-manufactured to tight tolerances, this Aluminum 6061 sheet boasts a thickness of 0.190 inches, a length of 23 inches, and a width of 22 inches. Material grade 6061 is a precipitation-hardened aluminum alloy, offering excellent mechanical properties including high tensile and yield strength, good formability, and outstanding corrosion resistance, especially in marine environments. Its weldability is also noteworthy, allowing for straightforward fabrication of complex hydraulic manifold blocks, structural supports, and protective enclosures where lightweight yet durable performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface integrity prior to fabrication. 2. Machine to precise component specifications using appropriate cutting and drilling parameters for aluminum. 3. Deburr all edges thoroughly to prevent fluid contamination and stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel machining parameters for aluminum. | Employ specialized aluminum tooling and machining speeds/feeds to prevent excessive heat buildup, tool wear, and poor surface finish. |
| Ignoring edge preparation after cutting. | Thoroughly deburr all cut edges to remove sharp fragments, which can become loose and damage hydraulic components or seals. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Fluid Power System Housings, Structural Components for Mobile Hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||