This Aluminum 6061 stock sheet offers superior strength and corrosion resistance for demanding pulling and lifting applications. Its precise dimensions ensure reliable performance in critical operations.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.179" |
| Length | 16" |
| Width | 27" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet features a thickness of 0.179 inches, a length of 16 inches, and a width of 27 inches. Composed of Alloy 6061, it delivers an optimal balance of strength, formability, and weldability, with a tensile strength of approximately 45,000 psi and a yield strength of 40,000 psi. This material's excellent corrosion resistance makes it suitable for environments exposed to moisture and varying conditions, commonly utilized in the fabrication of custom lifting fixtures, winch components, and structural elements for material handling equipment where a high strength-to-weight ratio is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for mounting is clean, dry, and free from contaminants. 2. Accurately mark and pre-drill mounting holes according to design specifications. 3. Securely fasten the sheet using appropriate hardware, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners for the load capacity. | Always select fasteners rated for the intended load and environmental conditions, utilizing lock washers or thread locker for vibration resistance. |
| Insufficient surface preparation leading to poor adhesion or stress points. | Thoroughly clean and degrease the mounting area before installation to ensure optimal contact and stress distribution. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom lifting fixture fabrication, Winch component manufacturing, Material handling equipment structure.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||