This Aluminum 6061 stock sheet, precisely manufactured to 0.116" thickness, 21" length, and 33" width, is a premium choice for demanding hydraulic systems requiring robust, lightweight, and corrosion-resistant components.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.116" |
| Length | 21" |
| Width | 33" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers an exceptional balance of strength, weldability, and corrosion resistance, making it ideal for a wide range of hydraulic manifold blocks, fluid reservoirs, and structural components. Its alloy composition (Aluminum 6061) provides excellent mechanical properties, including a yield strength of approximately 240 MPa and an ultimate tensile strength of roughly 290 MPa, ensuring reliable performance under pressure. The precise dimensions of 0.116" thickness, 21" length, and 33" width allow for efficient machining and fabrication of intricate hydraulic assemblies, meeting stringent industry standards for fluid power applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions for the hydraulic component. 3. Machine, drill, and deburr all features according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade aluminum for hydraulic components. | Always select Aluminum 6061 or higher for hydraulic applications due to its superior strength, corrosion resistance, and machinability. |
| Inadequate surface preparation before machining. | Thoroughly clean the Aluminum 6061 sheet to remove any debris or oils to prevent machining defects and ensure precise tolerances. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Fluid Reservoirs, Hydraulic System Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||