This 0.098" thick Aluminum 6061 stock sheet, measuring 40" x 19", offers exceptional corrosion resistance and formability. Its versatility makes it a superior choice for demanding plumbing and janitorial installations requiring longevity and structural integrity.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.098" |
| Length | 40" |
| Width | 19" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet is precisely manufactured to a thickness of 0.098 inches, with dimensions of 40 inches in length and 19 inches in width. The 6061 alloy composition provides excellent strength-to-weight ratio, superior corrosion resistance to common chemicals and water found in plumbing and janitorial environments, and good weldability. Its inherent durability ensures a long service life, resisting deformation and degradation under typical operational stresses. This material is ideal for fabricating custom fittings, containment systems, protective panels, and structural supports within these critical service areas.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, level, and free from debris. 2. Accurately measure and cut the aluminum sheet to the required dimensions using appropriate metal cutting tools. 3. Secure the sheet using corrosion-resistant fasteners, ensuring a tight and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can lead to galvanic corrosion with aluminum. | Always use stainless steel or aluminum fasteners specifically designed for use with aluminum alloys to prevent corrosion. |
| Over-tightening fasteners, which can cause the aluminum sheet to deform or crack. | Apply appropriate torque to fasteners, using washers to distribute pressure evenly and avoid localized stress points. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom plumbing fixtures and fittings, Janitorial station fabrication, Corrosion-resistant containment trays and splash guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||