This 0.090-inch thick Aluminum 6061 stock sheet, measuring 28" x 37", offers excellent corrosion resistance and formability, making it a preferred choice for demanding heating and cooling applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.090" |
| Length | 28" |
| Width | 37" |
Specified by design engineers worldwide, this Aluminum 6061 alloy stock sheet is engineered to exacting standards. Its nominal dimensions of 0.090" (2.286 mm) thickness, 28" (711.2 mm) length, and 37" (939.8 mm) width provide a versatile platform for fabrication. Aluminum 6061 exhibits a superior strength-to-weight ratio, good weldability, and excellent thermal conductivity, making it an optimal material for heat exchangers, ductwork, and other components within heating and cooling systems requiring efficient heat transfer and structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against design specifications. 2. Perform necessary cutting, bending, or machining operations using appropriate tooling for aluminum alloys. 3. Ensure proper joint preparation and welding or fastening techniques are employed for optimal structural integrity and thermal performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during bending, leading to material deformation or cracking. | Employ controlled bending radii and appropriate tooling designed for 0.090" aluminum sheet to prevent overstressing the material. |
| Inadequate surface preparation before welding, resulting in porous or weak joints. | Thoroughly clean the joint area of any oxides, oils, or contaminants using a stainless steel brush and solvent prior to welding. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fins, HVAC Ductwork Components, Thermal Management Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||