High-strength, corrosion-resistant Aluminum 6061 sheet, precisely manufactured for demanding hydraulic applications. Offers excellent machinability for custom component fabrication.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.089" |
| Length | 14" |
| Width | 34" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a nominal thickness of 0.089 inches, a width of 34 inches, and a length of 14 inches. Aluminum 6061 is a precipitation-hardened aluminum alloy known for its excellent corrosion resistance, good strength, weldability, and machinability. These characteristics make it a preferred material for hydraulic manifold blocks, fluid power system housings, and structural components within hydraulic equipment where weight reduction and durability are paramount. Its consistent material properties ensure reliable performance under pressure and in various operating environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before cutting or machining. 2. Utilize appropriate cutting tools designed for aluminum to achieve precise dimensions for hydraulic component interfaces. 3. Deburr all edges thoroughly after cutting to prevent fluid flow restrictions and potential component damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate deburring after cutting. | Thoroughly deburr all cut edges using a deburring tool or file to ensure smooth fluid pathways and prevent internal component wear. |
| Using incorrect cutting tools leading to ragged edges. | Employ high-speed steel or carbide-tipped saw blades specifically designed for cutting aluminum to achieve clean, precise cuts. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifold Blocks, Fluid Power System Housings, Custom Hydraulic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||