This Aluminum 6061 stock sheet is engineered for superior thermal conductivity, making it a prime choice for demanding heating and cooling applications. Its robust alloy composition ensures durability and corrosion resistance.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.076" |
| Length | 44" |
| Width | 30" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet features a nominal thickness of 0.076 inches, a precise length of 44 inches, and a width of 30 inches. The 6061 alloy offers an excellent balance of strength, corrosion resistance, and formability, with a typical yield strength exceeding 35 ksi and a tensile strength above 45 ksi. Its thermal conductivity is approximately 167 W/(m·K), crucial for efficient heat transfer in HVAC systems, heat sinks, and evaporators. The material is readily weldable and machinable, facilitating complex component fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions against project requirements. 2. Prepare surfaces for joining or machining according to application specifications. 3. Fabricate or install the sheet into the intended heating or cooling system component.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade aluminum for heat dissipation applications. | Always specify Aluminum 6061 or a comparable alloy known for its high thermal conductivity for optimal performance in heating and cooling systems. |
| Improper joint preparation leading to poor thermal transfer. | Ensure all surfaces intended for welding or bonding are meticulously cleaned and free from contaminants to maximize heat transfer efficiency. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Components, HVAC Ducting and Fin Stock, Heat Sinks and Thermal Management, Evaporator and Condenser Panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||