High-strength Aluminum 6061 stock sheet, precisely manufactured to 0.076-inch thickness, 45-inch length, and 34-inch width. This alloy offers excellent machinability and corrosion resistance, making it a superior choice for demanding hydraulic systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.076" |
| Length | 45" |
| Width | 34" |
Engineered for reliability and performance, this Aluminum 6061 stock sheet is manufactured to exacting standards for hydraulic system components. Measuring 0.076" thick, 45" in length, and 34" in width, it leverages the exceptional strength-to-weight ratio characteristic of 6061 aluminum. This alloy exhibits good corrosion resistance, particularly in mild environments, and boasts excellent weldability and formability. Its properties make it ideal for manifolds, housings, and structural elements within hydraulic circuits where durability and dimensional stability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants before fabrication. 2. Fabricate components according to design specifications, utilizing appropriate machining and forming techniques. 3. Inspect all fabricated parts for dimensional accuracy and surface integrity prior to assembly into the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material than specified for hydraulic pressure containment. | Always verify the required material thickness against the system's operating pressure and safety factors. |
| Inadequate surface preparation leading to poor sealing or corrosion. | Thoroughly clean and deburr all edges and surfaces before assembly to ensure proper sealing and prevent premature degradation. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic Manifolds, Hydraulic System Housings, Structural Components for Fluid Power.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||