This Aluminum 6061 stock sheet, sized at 0.071" x 45" x 19", offers exceptional corrosion resistance and formability. Ideal for custom fabrication in demanding plumbing and janitorial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.071" |
| Length | 45" |
| Width | 19" |
Precision-manufactured to tight tolerances, this Aluminum 6061 stock sheet measures 0.071 inches in thickness, 45 inches in length, and 19 inches in width. Composed of a heat-treatable alloy, 6061 exhibits a superior balance of strength, workability, and corrosion resistance, making it well-suited for environments prone to moisture and chemical exposure. Its excellent weldability and machinability facilitate custom fabrication of fittings, supports, and enclosures. This material's inherent durability ensures longevity in rigorous industrial and commercial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the installation area thoroughly, removing any debris or residue. 2. Measure and cut the Aluminum 6061 sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using suitable fasteners or welding techniques as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for aluminum, leading to burrs and poor edge quality. | Employ high-speed steel or carbide-tipped saw blades designed for non-ferrous metals. Ensure proper feed rates and coolant for clean cuts. |
| Improper surface preparation before joining, resulting in weak welds or adhesive bonds. | Thoroughly degrease and abrade the joining surfaces. For welding, a wire brush specifically for aluminum should be used to remove the oxide layer. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom pipe supports and brackets, Drainage system components, Protective enclosures for equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||