This 0.061" thick Aluminum 6061 stock sheet, measuring 14" x 48", offers excellent corrosion resistance and good strength-to-weight ratio, making it a superior choice for demanding pressure and temperature control systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.061" |
| Length | 14" |
| Width | 48" |
Precision-manufactured to tight tolerances, this Aluminum 6061 sheet (0.061" x 14" x 48") exhibits exceptional mechanical properties characteristic of the 6000 series alloys. Its composition, including magnesium and silicon, provides a balanced combination of strength, weldability, and corrosion resistance, crucial for components operating under varying pressure and temperature loads. The material's thermal conductivity also aids in efficient heat dissipation within control systems. This specific gauge and size are optimized for fabrication into housings, manifolds, and structural elements within pressure and temperature regulation equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately cut to the required dimensions for the specific application. 3. Fabricate and integrate into the pressure/temperature control system using appropriate joining methods (e.g., welding, mechanical fastening).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade aluminum alloy for critical pressure applications. | Always specify Aluminum 6061 for its proven strength and corrosion resistance in pressure and temperature control systems. |
| Improper surface preparation before fabrication or welding. | Thoroughly degrease and clean the aluminum surface to ensure optimal joint integrity and prevent weld defects. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel components, Heat exchanger fabrication, Temperature control system housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||