This 0.048" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely sized at 41" x 21", it's ideal for a wide range of fabrication and hardware projects.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.048" |
| Length | 41" |
| Width | 21" |
Specified by design engineers worldwide, this Aluminum 6061 alloy stock sheet is manufactured to exacting standards. Its nominal dimensions are 0.048 inches in thickness, 41 inches in length, and 21 inches in width. The 6061 alloy is renowned for its excellent weldability, brazing, machinability, and formability, coupled with good fatigue strength and corrosion resistance, making it a superior choice for structural components, marine applications, and general fabrication where a balance of strength and lightweight properties is critical. It exhibits a tensile strength of approximately 45 ksi and a yield strength of 40 ksi.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is stable and clean. 2. Accurately measure and mark the desired cut lines on the aluminum sheet. 3. Utilize appropriate cutting tools (e.g., shears, saws with metal-cutting blades) to make precise cuts, maintaining consistent pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting blades which can cause jagged edges and deformation. | Employ sharp, specifically designed metal-cutting blades for clean, precise cuts and prolonged tool life. |
| Applying excessive force during cutting, leading to material stress and potential cracking. | Apply steady, controlled pressure appropriate for the material thickness and cutting tool to avoid stressing the aluminum. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Custom brackets and fixtures, Enclosures and housings, Signage and display components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||