This 0.036" thick Aluminum 6061 stock sheet offers exceptional strength-to-weight ratio, making it a superior choice for fabricating lightweight yet robust components in pulling and lifting systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.036" |
| Length | 44" |
| Width | 36" |
Trusted by engineers across multiple sectors, this Aluminum 6061 stock sheet is manufactured to exacting standards, featuring a precise thickness of 0.036 inches, a length of 44 inches, and a width of 36 inches. Aluminum 6061 is a precipitation-hardened alloy known for its excellent corrosion resistance, good weldability, and high strength, particularly after heat treatment. Its balanced properties make it ideal for structural applications within pulling and lifting equipment where reduced mass is critical without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Carefully position the sheet according to design specifications for the pulling or lifting component. 3. Secure the sheet using appropriate fastening methods such as welding, riveting, or bolting, ensuring all connections meet load-bearing requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during bending or forming, which can lead to cracking or reduced material strength. | Employ controlled bending techniques with appropriate tooling and consider intermediate annealing if complex forming is required. |
| Inadequate surface preparation before welding or bonding, resulting in poor joint integrity. | Thoroughly clean and degrease all mating surfaces to remove oxides, oils, and other impurities. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Fabrication of custom lifting slings and rigging components, Lightweight structural elements for hoists and winches, Protective guards and fairings for pulling machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||