This 0.620" thick Aluminum 6061 stock sheet offers superior strength-to-weight ratio and excellent corrosion resistance, making it the premier choice for robust hydraulic system components.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.620" |
| Length | 31" |
| Width | 18" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet measures 0.620 inches in thickness, 31 inches in length, and 18 inches in width. Conforming to ASTM B209 standards, this T6 temper alloy provides exceptional tensile strength and yield strength, crucial for withstanding high pressures and cyclic loading inherent in hydraulic systems. Its excellent machinability and weldability facilitate complex component fabrication, while its inherent corrosion resistance ensures longevity in diverse operating environments. This material is specified for applications demanding reliability and performance under significant mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against design specifications. 2. Prepare mating surfaces to ensure a clean, flat interface. 3. Securely fasten the sheet using appropriate hardware and torque specifications as per hydraulic system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fastener types or sizes for hydraulic connections. | Consult the hydraulic system design documentation for recommended fastener materials, thread types, and sizes. Ensure all fasteners are rated for the operating pressure and compatible with the fluid. |
| Allowing debris or contaminants to enter the hydraulic system during installation. | Thoroughly clean the aluminum sheet and all associated components before assembly. Utilize protective covers or plugs on open ports and connections until ready for fluid fill. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Hydraulic manifold blocks, Cylinder end caps, Reservoir fabrication, Pump housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||