This 0.068" thick Aluminum 6061 stock sheet, measuring 24" x 30", is engineered for superior performance in demanding heating and cooling systems. Its excellent thermal conductivity and corrosion resistance ensure reliability.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.068" |
| Length | 24" |
| Width | 30" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet offers a precise thickness of 0.068 inches, a length of 24 inches, and a width of 30 inches. Aluminum 6061 is a precipitation-hardened alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and high weldability, making it a preferred choice for heat exchangers, ductwork, and structural components in HVAC systems where thermal management and longevity are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Cut the sheet to the required dimensions using appropriate metal cutting tools. 3. Install the cut sheet into the designated HVAC system component, ensuring a secure fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or uneven edges. | Utilize sharp, high-quality metal cutting blades designed for aluminum to achieve clean, precise cuts. |
| Inadequate surface preparation before installation. | Thoroughly clean the sheet surface to remove any oils, dirt, or protective coatings that could impede heat transfer or joint integrity. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Heat Exchanger Fabrication, HVAC Ductwork Construction, Chiller Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||