This 0.499-inch thick, 43-inch square polycarbonate sheet offers exceptional impact resistance and clarity. Ideal for demanding industrial environments requiring robust material performance and safety.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.499" |
| Length | 43" |
| Width | 43" |
Built to exacting engineering tolerances, this 0.499" thick polycarbonate stock sheet measures 43 inches by 43 inches. Engineered from high-performance polycarbonate resin, it exhibits superior impact strength (rated at 150 times that of glass) and excellent optical clarity. Its wide operating temperature range and resistance to UV degradation make it suitable for both indoor and outdoor industrial applications such as machine guarding, protective enclosures, and glazing where safety and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and structurally sound. 2. Position the polycarbonate sheet carefully, avoiding excessive stress points. 3. Secure the sheet using appropriate fasteners and sealing methods designed for polycarbonate, allowing for thermal expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drilling bits without chip breakers. | Utilize specialized drill bits for plastics or standard bits with a reduced rake angle to prevent chipping and melting. |
| Over-tightening fasteners, causing stress cracking. | Employ washers and hand-tighten fasteners, allowing adequate clearance for thermal expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Enclosures, Impact-Resistant Glazing, Industrial Windows, Signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||