Engineered for rigorous hydraulic environments, this 316 stainless steel stock sheet offers exceptional corrosion resistance and mechanical integrity. Its substantial dimensions make it ideal for custom fabrication of robust hydraulic components.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.883" |
| Length | 39" |
| Width | 41" |
A proven choice for industrial professionals, this 316 stainless steel stock sheet is manufactured to exacting standards, ensuring superior performance in critical hydraulic applications. With dimensions of 0.883 inches thick, 39 inches in length, and 41 inches in width, it provides ample material for large-scale fabrications. The inherent properties of 316 stainless steel, including its enhanced molybdenum content, provide exceptional resistance to pitting and crevice corrosion, even in aggressive chemical and saltwater environments commonly found in hydraulic systems. This makes it an ideal substrate for manifolds, reservoirs, and structural components requiring long-term durability and reliability under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage prior to cutting. 2. Precisely cut the sheet to the required dimensions using appropriate industrial cutting equipment. 3. Deburr all cut edges to ensure smooth surfaces and prevent premature stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard stainless steel for corrosive hydraulic fluids. | Always select 316 stainless steel for its superior resistance to a wide range of corrosive media found in hydraulic systems. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to eliminate sharp points that can lead to premature failure or damage to seals. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Hydraulic Manifolds, Hydraulic Reservoirs, Custom Hydraulic System Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||