This robust 316 stainless steel stock sheet offers exceptional durability and corrosion resistance. Its precise dimensions make it suitable for custom fabrication in demanding industrial settings.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.903" |
| Length | 38" |
| Width | 41" |
A high-performance industrial component, this 316 stainless steel stock sheet features a substantial 0.903-inch thickness, a generous 38-inch length, and a 41-inch width. Engineered from marine-grade 316 stainless steel, it provides superior resistance to pitting, crevice corrosion, and general corrosion, particularly in chloride-rich environments common in plumbing and janitorial applications. This material's inherent strength and formability allow for custom fabrication into critical components, structural elements, and protective barriers where hygiene, chemical resistance, and longevity are paramount. Its excellent weldability ensures seamless integration into complex systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark cut lines on the sheet based on design specifications. 2. Utilize appropriate cutting tools (e.g., waterjet, laser, or abrasive saw) for clean, accurate cuts, ensuring minimal heat input to prevent material degradation. 3. Deburr all edges thoroughly to remove any sharp fragments and ensure a smooth finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate edge deburring. | Thoroughly deburr all cut edges to prevent safety hazards and ensure proper sealing in assembled components. |
| Excessive heat input during cutting. | Employ cutting methods that minimize heat-affected zones to preserve the stainless steel's corrosion resistance properties. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom fabrication of tank linings and sumps, Construction of specialized drain covers and grates, Fabrication of industrial countertops and work surfaces in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||