This 316 stainless steel stock sheet provides exceptional performance in harsh environments. Its robust construction and superior corrosion resistance make it ideal for critical heating and cooling system components, ensuring longevity and reliability.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.119" |
| Length | 24" |
| Width | 39" |
Purpose-built for heavy-duty applications, this 316 stainless steel stock sheet measures 0.119 inches in thickness, 24 inches in width, and 39 inches in length. Composed of austenitic stainless steel with molybdenum, it exhibits enhanced resistance to pitting and crevice corrosion, particularly in chloride-rich environments. This makes it an optimal choice for heat exchangers, ductwork, and structural components within demanding HVAC and industrial cooling systems where elevated temperatures and aggressive media are present. The material's excellent formability and weldability facilitate integration into complex designs, maintaining structural integrity under thermal cycling and mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and inspect for any surface defects prior to cutting or fabrication. 2. Fabricate components according to design specifications, ensuring proper joint preparation for welding. 3. Install fabricated components in the designated heating or cooling system, following all applicable industry standards and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel in corrosive environments. | Always specify 316 stainless steel for applications involving potential exposure to chlorides or acidic media to prevent premature corrosion and failure. |
| Inadequate post-weld cleaning, leading to sensitization and reduced corrosion resistance. | Thoroughly clean all welds and surrounding areas after fabrication to remove heat-affected zone discoloration and prevent potential corrosion initiation. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Heat Exchanger Plates, HVAC Ductwork, Industrial Cooling Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||