This robust 316 stainless steel stock sheet provides exceptional strength and corrosion resistance. Its substantial dimensions make it ideal for fabricating custom heavy-duty components for demanding pulling and lifting applications.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.646" |
| Length | 39" |
| Width | 45" |
Built to exacting engineering tolerances, this 0.646" thick 316 stainless steel stock sheet offers superior tensile strength and a yield strength of approximately 30,000 psi. The austenitic chromium-nickel composition provides excellent resistance to pitting and crevice corrosion, particularly in marine and chemical environments. Its non-magnetic properties and high ductility ensure reliable performance under significant load stress. Dimensions are precisely controlled at 39" in length and 45" in width for consistent fabrication and integration into complex lifting and pulling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area for installation is clean, dry, and free of contaminants. 2. Carefully position the stock sheet according to the design requirements of the pulling or lifting apparatus. 3. Secure the sheet using appropriate high-strength fasteners or welding techniques, adhering to load-bearing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard stainless steel (e.g., 304) in corrosive environments. | Always specify 316 stainless steel for applications involving saltwater, chemicals, or other highly corrosive agents to prevent premature degradation and failure. |
| Underestimating the required thickness for the anticipated load. | Consult engineering load charts and perform stress calculations to ensure the 0.646" thickness is adequate for the intended pulling and lifting forces. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom winch drum fabrication, Heavy-duty lifting lug construction, Structural components for marine cranes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||