This robust 316 stainless steel stock sheet is engineered for superior performance in challenging hydraulic systems. Its exceptional corrosion resistance ensures longevity and operational integrity in demanding industrial settings.
| Standard | ASTM A106 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.353" |
| Length | 37" |
| Width | 38" |
Designed for demanding industrial environments, this 0.353-inch thick 316 stainless steel stock sheet offers exceptional strength and corrosion resistance, crucial for hydraulic component fabrication. The material's inherent passivation layer, formed by chromium and nickel content, provides superior defense against chloride-induced pitting and crevice corrosion, making it ideal for marine, chemical processing, and high-pressure hydraulic fluid handling. With dimensions of 37 inches in length and 38 inches in width, this sheet provides ample material for precise cutting and machining of hydraulic manifolds, valve bodies, and structural supports, guaranteeing reliable operation under extreme conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut to required dimensions using appropriate machining techniques. 3. Deburr all edges thoroughly to prevent stress risers and material fatigue.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic components exposed to corrosive fluids. | Always specify and use 316 stainless steel for its superior corrosion resistance in hydraulic applications. |
| Inadequate edge preparation after cutting, leading to potential failure points. | Thoroughly deburr all cut edges to remove sharp corners and prevent stress concentrations. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Hydraulic Manifold Fabrication, Valve Body Machining, Hydraulic Cylinder Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||