This robust 316 stainless steel stock sheet offers exceptional corrosion resistance for demanding pulling and lifting operations. Its substantial dimensions and premium material ensure enduring performance in harsh environments.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.555" |
| Length | 32" |
| Width | 12" |
Engineered for reliability and performance, this 0.555-inch thick stock sheet is fabricated from premium 316 stainless steel, renowned for its superior resistance to pitting and crevice corrosion, particularly in saline or acidic conditions. The precise dimensions of 32 inches in length and 12 inches in width provide ample material for custom fabrication of critical components. Its inherent strength and durability make it an ideal substrate for heavy-duty hooks, shackles, plates, and other essential rigging hardware subject to significant tensile loads and environmental exposure in marine, chemical processing, and offshore industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any surface contaminants. 2. Mark precise cutting lines according to fabrication requirements. 3. Utilize appropriate cutting tools (e.g., abrasive cut-off wheel, plasma cutter) suitable for thick stainless steel, ensuring adequate ventilation and personal protective equipment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can induce rust. | Always use dedicated stainless steel cutting blades or tools to prevent contamination and galvanic corrosion. |
| Inadequate post-cutting cleaning leading to surface oxidation. | Thoroughly degrease and pickle the cut edges to restore passivation and prevent premature corrosion. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Custom fabricated lifting lugs, Heavy-duty pulling plates, Marine rigging components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||