This robust 316 stainless steel stock sheet is engineered for critical hydraulic systems. Its superior corrosion and pitting resistance ensures long-term performance in harsh environments.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.637" |
| Length | 37" |
| Width | 38" |
Manufactured under strict quality controls, this 316 stainless steel stock sheet boasts a substantial 0.637" thickness, a 37" length, and a 38" width. Grade 316 stainless steel is renowned for its enhanced molybdenum content, providing exceptional resistance to chloride corrosion, pitting, and crevice corrosion, making it ideal for marine, chemical processing, and high-pressure hydraulic applications where fluid purity and material integrity are paramount. Its consistent dimensional tolerances and material uniformity guarantee reliable performance and integration into complex hydraulic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project specifications. 2. Prepare cutting and machining equipment to the required tolerances for 0.637" thick 316 stainless steel. 3. Perform all necessary fabrication steps, ensuring no contamination of the material surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel for corrosive hydraulic fluids. | Always specify and use 316 stainless steel for its superior resistance to chloride and other corrosive agents prevalent in hydraulic systems. |
| Inadequate edge preparation after cutting. | Ensure all cut edges are properly deburred and smoothed to prevent stress risers and potential failure points in high-pressure applications. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Hydraulic manifold blocks, Pressure vessel components, Offshore fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||