High-performance 316 stainless steel stock sheet engineered for robust pulling and lifting applications. Its superior corrosion resistance and mechanical strength ensure reliability in harsh environments.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.152" |
| Length | 48" |
| Width | 40" |
Specified by design engineers worldwide, this 316 stainless steel stock sheet offers a nominal thickness of 0.152 inches, a standard length of 48 inches, and a width of 40 inches. Composed of an austenitic chromium-nickel-molybdenum alloy, it provides exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking in chloride-containing environments. Its excellent weldability and formability make it suitable for custom fabrication of heavy-duty lifting lugs, brackets, and structural components subjected to significant tensile and shear forces, particularly in marine, chemical processing, and offshore industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the surface for attachment, ensuring it is clean and free from contaminants. 2. Accurately mark and drill mounting holes according to design specifications. 3. Securely fasten the sheet using appropriately rated fasteners and hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incompatible fasteners. | Always select fasteners that meet or exceed the load-bearing requirements of the application and are compatible with 316 stainless steel to prevent galvanic corrosion. |
| Inadequate surface preparation before attachment. | Thoroughly clean the mounting surfaces to remove dirt, grease, and any potential corrosives that could compromise the integrity of the joint. |
A: This 316 Stainless Steel Stock Sheet is manufactured from 316 Stainless Steel.
A: Fabrication of custom lifting eyes and lugs, Reinforcement plates for structural connections in marine environments, Component bases for heavy-duty winch and hoist systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||